Raspberry Pi: using a 10.1” display

The objective of this post is to analyze a 10.1″ display for the Raspberry Pi. The display was tested on a Raspberry Pi 3 model B+.
Continue reading “Raspberry Pi: using a 10.1” display”

Advertisements

ESP32 Arduino SSD1306 OLED: Drawing a QR Code

The objective of this post is to explain how to draw a QR Code on a SSD1306 OLED display, using the Arduino core on the ESP32. For this tutorial an Elecrow’s version of the OLED was used. The display can be bought here. The ESP32 board used was a NodeMCU.

Continue reading “ESP32 Arduino SSD1306 OLED: Drawing a QR Code”